How To Change The pH Of Water? {The Effective Way}

When it comes to maintaining optimum health and well-being, having the right amount of alkalinity or acidity in the body is extremely important. Our bodies strive to balance these two opposites, and the same principle applies to our drinking water. Ensuring that the pH levels in our water are balanced properly can have significant benefits. Ph logarithmic is a natural thing to happen in water. The pH scale is logarithmic, so a decrease of 0.1 corresponds to an increase of 30% in acidity.

In this article, we will explore how to easily change the pH of the water so that you can maintain a healthy lifestyle. We will discuss the importance of understanding pH levels in relation to human health and then provide some tips on adjusting them if needed.

What is pH?

This mark between 0 and 14 defines the measurement of the acidity of water on a logarithmic scale. If the number is lower, the water is more acidic. When the number is higher, the basic is more. pH level 7 is considered neutral. When counting down, pH below 7 is 10 times more acidic than the previous digit. While counting above, pH 7 is 10 times more basic than the last number.

pH refers to the power of hydrogen. The numerical pH value is defined by the molar concentration of hydrogen ions (H+) ³. It is possible to receive the negative logarithm of H+ concentration (-log (H+)). When the H+ concentration of a solution is 10-3 M, its pH solution may be log (10-3). It equals 3. 

Here is How To Change The pH of Water: ( some points are taken from this video https://youtu.be/C91BZsOb41o)

Step-1: Purify Your Water

Distiller gives a super effective method to remove the poisons from the water. Medical consultant Dr. Andrew Weil explains that distillation normally removes all viruses, bacteria, and contaminants.

The distiller purifies water by boiling first, collecting the steam, and condensing the water into droplets to the top of the storage container. The droplets cleanse of bigger elements as well as they are added to the storage jug. Some distiller units may be expediently hooked to your refrigerator’s ice and water unit.

Step-2: Test The pH Of Your Water

When water is purified and tests the pH level of water, you can enter pH test strips to test water pH levels from the local fitness food stores or online. Making conscious of the preliminary pH of your purified water to ensure you have a super idea of how much of an adjustment is a must to get your expected pH level.

Step-3: Baking Soda

An 8 oz (230 g) glass of water should be mixed with 1 teaspoon baking soda (4.9 mL). The pH value of baking soda is 9, making it a basic substance. Stir briskly with a spoon or whisk about a teaspoon (4.9 mL) into a glass of water. Use a litmus strip to measure the water’s pH once all the baking soda crumbs have dissolved.

Step-4: Fresh Lemons

If you do not use baking soda in your consuming water, it is not a matter. Just add a fresh lemon in your drinking water. It will make you purify drinking water more alkaline. It is important to keep in mind that fresh lemon is anionic.

Drinking the sharp lemon water may become alkaline since the body responds with the lemon’s anions while the digestive process continues. Lemon juice should not be used, or lemons that are cut and kept open all day long. Only use fresh lemons that have been exposed to the fresh air for over 30 minutes.

Can I Lower the PH levels?

If you think your water ph is higher than usual, then there are steps you can take to lower it. The following steps are:

1. Apply phosphoric acid to lessen the pH level of your water. Slowly add chemically and be cautious so that it does not come in contact with the skin. You may buy a diluted solution of phosphoric acid prepared particularly for gardeners in hardware stores and garden centers. The sum of phosphoric acid ads with water relies on the concentration level of phosphoric acid in the product bought. Follow the instructions carefully along with the purchase.
2. Using sulfuric acid or nitric acid to lower the pH level of water. These types of acids are dangerous if they are not used properly. Follow the instructions carefully and slowly add the chemicals which come with them.
3. You may add citric acid if your water is lower in pH. Be sure the citric acid is food-grade.

Which Things Influence PH?

The pH of water is an important measure of its acidity or alkalinity, and it can be affected by various factors. Interactions with surrounding rocks and other materials, such as carbonates, often cause natural changes in pH.

These reactions can cause the pH to fluctuate depending on the type of rock present. Additionally, precipitation, especially acid rain, can affect the water’s pH levels. Wastewater or mining discharges can also contribute to changes in pH.

Another factor that influences the pH of water is CO2 concentrations. When CO2 dissolves into water, it forms carbonic acid, lowering the pH level. This process is known as “acidification” and can be caused by natural sources such as decaying organic matter or human activities like burning fossil fuels or deforestation.

Acidification has been linked to several environmental issues, including coral bleaching and fish mortality. It is, therefore, important to monitor and manage these processes to maintain healthy aquatic ecosystems.

Frequently Asked Questions [FAQs]

Conclusion

The pH of water can be affected by various factors, including interactions with rocks and other materials, acid rain, wastewater or mining discharges, and CO2 concentrations. It is important to monitor and manage these processes to maintain healthy aquatic ecosystems. By following those steps, you can easily change the ph of water without any hassle.